Head to head
Doosan Robotics A0509 vs KUKA LBR iisy 3 R760
A specification duel across payload, reach, precision, and footprint, with a plain read on which arm suits which job.
Entry level cobot for light assembly and machine tending
Easy to program cobot for light assembly and pick tasks
Specification duel
Green marks the stronger figure. Unconfirmed specs are shown but not scored.
The verdict
The specs separate them here: the Doosan Robotics A0509 carries more, 5 kg to the KUKA LBR iisy 3 R760's 3 kg. If precision drives the job, the Doosan Robotics A0509 holds the tighter repeatability at ±0.03 mm. They run different controllers, the Doosan Robotics A0509 on the CS-04 (DC Controller) and the KUKA LBR iisy 3 R760 on the KR C5 micro, so whichever platform your team already programs and stocks parts for is a real tiebreaker. Mounting options differ: the Doosan Robotics A0509 lists Any, and the KUKA LBR iisy 3 R760 lists Floor, Wall, Ceiling, and Angle. Both are aimed at collaborative assembly and small parts handling, with the Doosan Robotics A0509 stretching to machine tending and the KUKA LBR iisy 3 R760 to pick and place.
Choose this one when
Job fit first, then the controller and cell constraints that decide which arm you can actually install.
Choose the Doosan Robotics A0509 when
- Joint torque sensing on every axis
- Compact size fits small cells
- Straightforward hand guided programming
- Good reach for its payload class
Watch for
- Light payload limits heavier tooling
- Collaborative speed limits reduce raw cycle time
Choose the KUKA LBR iisy 3 R760 when
- Fast setup with app based programming
- Low entry cost for a KUKA cobot
- Compact size fits benchtop cells
- Designed for collaborative applications
Watch for
- Light payload limits it to small parts
- Speed is capped by collaborative safety limits
Controller ecosystem
Programming habits, spare parts, and pendant familiarity often decide the pick when payloads are close.
- Brand
- Doosan
- Controller
- CS-04 (DC Controller)
- Class
- collaborative
Service, spares, and pendant training for the Doosan Robotics A0509 run through Doosan's CS-04 (DC Controller) stack.
- Brand
- KUKA
- Controller
- KR C5 micro
- Class
- collaborative
Service, spares, and pendant training for the KUKA LBR iisy 3 R760 run through KUKA's KR C5 micro stack.
These arms run different controllers (CS-04 (DC Controller) vs KR C5 micro). If your team already programs one of them, retraining programmers and stocking a second set of spares usually costs more than a small payload or reach advantage on paper.
Mounting, footprint, and mass
How the arm can be oriented in the cell, and how much mass you have to mount.
| Field | Doosan Robotics A0509 | KUKA LBR iisy 3 R760 |
|---|---|---|
| Mounting | Any | Floor, Wall, Ceiling, and Angle |
| Robot mass | 21 kg | 22.8 kg |
| Protection (IP) | IP54 | IP30 |
Heavier arms want stiffer bases and more clearance around the swept volume, and they push freight and rigging costs up on the install. IP ratings only cover the section they name, so a wrist-only rating protects the wrist and nothing else; check the body rating separately before you commit the arm to a washdown or dusty cell.
Application fit
Where each arm is aimed, based on the applications listed on its robot page.
Both pages list collaborative assembly and small parts handling, with the differences below.
Doosan Robotics A0509 also covers
KUKA LBR iisy 3 R760 also covers
Speed and cycle-time planning
Speed is rarely a single datasheet number across brands. Use payload, reach, and class as the planning frame, then confirm cycle time in a path study.
The Doosan Robotics A0509 is a collaborative arm rated 5 kg at 900 mm with ±0.03 mm repeatability. The KUKA LBR iisy 3 R760 is a collaborative arm rated 3 kg at 760 mm with ±0.1 mm. Class changes how speed shows up in a cell: collaborative arms slow down near people and can speed up in a guarded mode, while industrial arms run at rated speed inside a fence or scanner field. Which arm cycles faster on your part depends on the path, the payload, and the safeguarding, so confirm the takt with a path study before you quote it.
Common questions
- Which has more payload, the Doosan Robotics A0509 or the KUKA LBR iisy 3 R760?
- The Doosan Robotics A0509 has more payload at 5 kg versus 3 kg.
- Which reaches farther?
- The Doosan Robotics A0509 has more reach at 900 mm versus 760 mm.
- Which is more precise?
- The Doosan Robotics A0509 holds tighter repeatability at ±0.03 mm.
- Should I choose the Doosan Robotics A0509 or the KUKA LBR iisy 3 R760?
- Match the pick to the job. The Doosan Robotics A0509 is a collaborative arm at 5 kg and 900 mm. The KUKA LBR iisy 3 R760 is a collaborative arm at 3 kg and 760 mm.
- Do the Doosan Robotics A0509 and KUKA LBR iisy 3 R760 use the same controller?
- No. The Doosan Robotics A0509 uses CS-04 (DC Controller) and the KUKA LBR iisy 3 R760 uses KR C5 micro.
- How do the IP ratings compare?
- The Doosan Robotics A0509 is rated IP54. The KUKA LBR iisy 3 R760 is rated IP30. Check wrist versus body coverage before washdown or dusty cells.