Head to head
Doosan Robotics H2515 vs KUKA KR 16 R2010
A specification duel across payload, reach, precision, and footprint, with a plain read on which arm suits which job.
Heavy payload cobot for palletizing and handling
Long reach mid payload robot for handling and welding
Specification duel
Green marks the stronger figure. Unconfirmed specs are shown but not scored.
The verdict
The first question here is not specs but the cell: the Doosan Robotics H2515 is a collaborative arm designed for reduced-speed operation near people (fenceless only where an application risk assessment allows it), while the KUKA KR 16 R2010 is a 6-axis industrial arm that runs behind a guard at full speed. They run different controllers, the Doosan Robotics H2515 on the CS-02 (DC Controller) and the KUKA KR 16 R2010 on the KR C4, so whichever platform your team already programs and stocks parts for is a real tiebreaker. Mounting options differ: the Doosan Robotics H2515 lists Floor, and the KUKA KR 16 R2010 lists Floor, Ceiling, Wall, and Angle. Both are aimed at machine tending and material handling, with the Doosan Robotics H2515 stretching to collaborative assembly and palletizing and the KUKA KR 16 R2010 to arc welding and dispensing.
Choose this one when
Job fit first, then the controller and cell constraints that decide which arm you can actually install.
Choose the Doosan Robotics H2515 when
- High payload for a collaborative robot
- Full reach industrial style envelope
- Joint torque sensing throughout the arm
- Suited to palletizing light to medium cases
Watch for
- Larger arm mass than lighter Doosan cobots
- Collaborative speed limits still apply at this payload
Choose the KUKA KR 16 R2010 when
- Large work envelope for a mid payload robot
- Proven platform with a long service history
- Good stiffness for welding and dispensing paths
- Wide parts and support network
Watch for
- Larger footprint than compact arms in the same payload class
- Reach comes at some cost to cycle speed versus shorter arm variants
Controller ecosystem
Programming habits, spare parts, and pendant familiarity often decide the pick when payloads are close.
- Brand
- Doosan
- Controller
- CS-02 (DC Controller)
- Class
- collaborative
Service, spares, and pendant training for the Doosan Robotics H2515 run through Doosan's CS-02 (DC Controller) stack.
- Brand
- KUKA
- Controller
- KR C4
- Class
- 6-axis industrial
Service, spares, and pendant training for the KUKA KR 16 R2010 run through KUKA's KR C4 stack.
These arms run different controllers (CS-02 (DC Controller) vs KR C4). If your team already programs one of them, retraining programmers and stocking a second set of spares usually costs more than a small payload or reach advantage on paper.
Mounting, footprint, and mass
How the arm can be oriented in the cell, and how much mass you have to mount.
| Field | Doosan Robotics H2515 | KUKA KR 16 R2010 |
|---|---|---|
| Mounting | Floor | Floor, Ceiling, Wall, and Angle |
| Robot mass | 70 kg | 255 kg |
| Protection (IP) | IP54 | IP65 |
Heavier arms want stiffer bases and more clearance around the swept volume, and they push freight and rigging costs up on the install. IP ratings only cover the section they name, so a wrist-only rating protects the wrist and nothing else; check the body rating separately before you commit the arm to a washdown or dusty cell.
Application fit
Where each arm is aimed, based on the applications listed on its robot page.
Both pages list machine tending and material handling, with the differences below.
Doosan Robotics H2515 also covers
- collaborative assembly
- palletizing
KUKA KR 16 R2010 also covers
Speed and cycle-time planning
Speed is rarely a single datasheet number across brands. Use payload, reach, and class as the planning frame, then confirm cycle time in a path study.
The Doosan Robotics H2515 is a collaborative arm rated 25 kg at 1500 mm with ±0.1 mm repeatability. The KUKA KR 16 R2010 is a 6-axis industrial arm rated 16 kg at 2013 mm with ±0.04 mm. Class changes how speed shows up in a cell: collaborative arms slow down near people and can speed up in a guarded mode, while industrial arms run at rated speed inside a fence or scanner field. Which arm cycles faster on your part depends on the path, the payload, and the safeguarding, so confirm the takt with a path study before you quote it.
Common questions
- Which has more payload, the Doosan Robotics H2515 or the KUKA KR 16 R2010?
- The Doosan Robotics H2515 has more payload at 25 kg versus 16 kg.
- Which reaches farther?
- The KUKA KR 16 R2010 has more reach at 2013 mm versus 1500 mm.
- Which is more precise?
- The KUKA KR 16 R2010 holds tighter repeatability at ±0.04 mm.
- Should I choose the Doosan Robotics H2515 or the KUKA KR 16 R2010?
- Match the pick to the job. The Doosan Robotics H2515 is a collaborative arm at 25 kg and 1500 mm. The KUKA KR 16 R2010 is a 6-axis industrial arm at 16 kg and 2013 mm.
- Do the Doosan Robotics H2515 and KUKA KR 16 R2010 use the same controller?
- No. The Doosan Robotics H2515 uses CS-02 (DC Controller) and the KUKA KR 16 R2010 uses KR C4.
- How do the IP ratings compare?
- The Doosan Robotics H2515 is rated IP54. The KUKA KR 16 R2010 is rated IP65. Check wrist versus body coverage before washdown or dusty cells.