Head to head
Doosan Robotics M1013 vs KUKA LBR iiwa 7 R800
A specification duel across payload, reach, precision, and footprint, with a plain read on which arm suits which job.
Mid payload cobot with industrial style reach
Sensitive seven axis cobot for precision tasks
Specification duel
Green marks the stronger figure. Unconfirmed specs are shown but not scored.
The verdict
The specs separate them here: the Doosan Robotics M1013 carries more, 10 kg to the KUKA LBR iiwa 7 R800's 7 kg, and the Doosan Robotics M1013 reaches farther, 1300 mm to 800 mm. If precision drives the job, the Doosan Robotics M1013 holds the tighter repeatability at ±0.05 mm. They run different controllers, the Doosan Robotics M1013 on the CS-02 (DC Controller) and the KUKA LBR iiwa 7 R800 on the KUKA Sunrise Cabinet, so whichever platform your team already programs and stocks parts for is a real tiebreaker. Mounting options differ: the Doosan Robotics M1013 lists Any, and the KUKA LBR iiwa 7 R800 lists Floor, Ceiling, and Wall. Both are aimed at collaborative assembly and machine tending, with the Doosan Robotics M1013 stretching to material handling and pick and place and the KUKA LBR iiwa 7 R800 to precision assembly and electronics assembly.
Choose this one when
Job fit first, then the controller and cell constraints that decide which arm you can actually install.
Choose the Doosan Robotics M1013 when
- Good reach to payload balance
- Widely deployed with strong integrator support
- Joint torque sensing on every axis
- High repeatability for a cobot
Watch for
- Collaborative speed limits reduce cycle time versus caged robots
- Mid payload limits use with heavier grippers
Choose the KUKA LBR iiwa 7 R800 when
- Seven axes give redundant, human like motion paths
- Joint torque sensing on every axis
- Good for delicate insertion and assembly tasks
- Programmable through intuitive hand guiding
Watch for
- Lower payload than most industrial arms
- Higher cost per kilogram of payload than standard robots
Controller ecosystem
Programming habits, spare parts, and pendant familiarity often decide the pick when payloads are close.
- Brand
- Doosan
- Controller
- CS-02 (DC Controller)
- Class
- collaborative
Service, spares, and pendant training for the Doosan Robotics M1013 run through Doosan's CS-02 (DC Controller) stack.
- Brand
- KUKA
- Controller
- KUKA Sunrise Cabinet
- Class
- collaborative
Service, spares, and pendant training for the KUKA LBR iiwa 7 R800 run through KUKA's KUKA Sunrise Cabinet stack.
These arms run different controllers (CS-02 (DC Controller) vs KUKA Sunrise Cabinet). If your team already programs one of them, retraining programmers and stocking a second set of spares usually costs more than a small payload or reach advantage on paper.
Mounting, footprint, and mass
How the arm can be oriented in the cell, and how much mass you have to mount.
| Field | Doosan Robotics M1013 | KUKA LBR iiwa 7 R800 |
|---|---|---|
| Mounting | Any | Floor, Ceiling, and Wall |
| Robot mass | 33 kg | 23.9 kg |
| Protection (IP) | IP54 | IP54 |
Heavier arms want stiffer bases and more clearance around the swept volume, and they push freight and rigging costs up on the install. IP ratings only cover the section they name, so a wrist-only rating protects the wrist and nothing else; check the body rating separately before you commit the arm to a washdown or dusty cell.
Application fit
Where each arm is aimed, based on the applications listed on its robot page.
Both pages list collaborative assembly and machine tending, with the differences below.
Doosan Robotics M1013 also covers
KUKA LBR iiwa 7 R800 also covers
- precision assembly
- electronics assembly
Speed and cycle-time planning
Speed is rarely a single datasheet number across brands. Use payload, reach, and class as the planning frame, then confirm cycle time in a path study.
The Doosan Robotics M1013 is a collaborative arm rated 10 kg at 1300 mm with ±0.05 mm repeatability. The KUKA LBR iiwa 7 R800 is a collaborative arm rated 7 kg at 800 mm with ±0.1 mm. Class changes how speed shows up in a cell: collaborative arms slow down near people and can speed up in a guarded mode, while industrial arms run at rated speed inside a fence or scanner field. Which arm cycles faster on your part depends on the path, the payload, and the safeguarding, so confirm the takt with a path study before you quote it.
Common questions
- Which has more payload, the Doosan Robotics M1013 or the KUKA LBR iiwa 7 R800?
- The Doosan Robotics M1013 has more payload at 10 kg versus 7 kg.
- Which reaches farther?
- The Doosan Robotics M1013 has more reach at 1300 mm versus 800 mm.
- Which is more precise?
- The Doosan Robotics M1013 holds tighter repeatability at ±0.05 mm.
- Should I choose the Doosan Robotics M1013 or the KUKA LBR iiwa 7 R800?
- Match the pick to the job. The Doosan Robotics M1013 is a collaborative arm at 10 kg and 1300 mm. The KUKA LBR iiwa 7 R800 is a collaborative arm at 7 kg and 800 mm.
- Do the Doosan Robotics M1013 and KUKA LBR iiwa 7 R800 use the same controller?
- No. The Doosan Robotics M1013 uses CS-02 (DC Controller) and the KUKA LBR iiwa 7 R800 uses KUKA Sunrise Cabinet.
- How do the IP ratings compare?
- The Doosan Robotics M1013 is rated IP54. The KUKA LBR iiwa 7 R800 is rated IP54. Check wrist versus body coverage before washdown or dusty cells.